模块化永磁直线游标电机等效磁网络及漏磁分析

在模块化永磁直线游标电机的初始设计及优化设计中,使用有限元方法(FEM)计算漏磁系数时需要耗费大量的建模和计算时间。针对这一问题,建立该种电机的等效磁网络模型,在建模期间,考虑气隙中的边缘效应,并计算永磁体组与定子齿在不同相对位置时的等效磁导,得到该种电机在一个周期内不同相对位置时的漏磁磁导和漏磁系数的数学解析表达式。采用FEM验证了该数学解析表达式的准确性。研究结果为模块化永磁直线游标电机的设计提供了理论依据。     

基于遗传-支持向量机的对置活塞二冲程柴油机气口高度优化

以某对置活塞二冲程柴油机为研究对象,基于一维仿真模型,利用遗传-支持向量机的方法,以油耗为优化目标,进行不同转速工况下进排气口高度组合的自动化寻优。结果表明:在1200r/min下,优化的进、排气口无量纲化高度组合为［0.075,0.105］,所得最小油耗为220.32g/(kW·h);对置活塞二冲程柴油机的气口最优高度应随着转速的提高逐渐增大;且在高转速(大于1600r/min)下,排气口最优高度增加趋势更加明显。      

Modeling irregular small bodies gravity field via extreme learning machines and Bayesian optimization

Close proximity operations around small bodies are extremely challenging due to their uncertain dynamical environment. Autonomous guidance and navigation around small bodies require fast and accurate modeling of the gravitational field for potential on-board computation. In this paper, we investigate a model-based, data-driven approach to compute and predict the gravitational acceleration around irregular small bodies. More specifically, we employ Extreme Learning Machine (ELM) theories to design, train and validate Single-Layer Feedforward Networks (SLFN) capable of learning the relationship between the spacecraft position and the gravitational acceleration. ELM-base neural networks are trained without iterative tuning therefore dramatically reducing the training time. Analysis of performance in constant density models for asteroid 25143 Itokawa and comet 67/P Churyumov-Gerasimenko show that ELM-based SLFN are able learn the desired functional relationship both globally and in selected localized areas near the surface. The latter results in a robust neural algorithm for on-board, real-time calculation of the gravity field needed for guidance and control in close-proximity operations near the asteroid surface.     

云制造环境下机床装备资源选择方法

针对云制造环境下机床装备资源具有数量大、异质异构、服务制约因素多等问题，提出了基于多准则决策的机床装备资源选择方法。首先，利用本体论对机床装备资源建模，将物理资源虚拟化封装，实现虚拟资源与物理资源的逻辑映射。进一步地，使用语言变量量化决策者评估信息，采用模糊决策与试验评价实验室（FDEMATEL）和熵值法（EW）相结合的组合赋权法，引入模糊VIKOR（FVIKOR）多属性决策方法对机床装备资源进行综合评估，建立FDEMATEL-EW-FVIKOR的多准则混合决策模型。最后，将该方法应用于某生产制造企业，实验对比决策结果验证了多准则混合决策模型的可行性和有效性。     

A drilling tool design and in situ identification of planetary regolith mechanical parameters

The physical and mechanical properties as well as the heat flux of regolith are critical evidence in the study of planetary origin and evolution. Moreover, the mechanical properties of planetary regolith have great value for guiding future human planetary activities. For planetary subsurface exploration, an inchworm boring robot (IBR) has been proposed to penetrate the regolith, and the mechanical properties of the regolith are expected to be simultaneously investigated during the penetration process using the drilling tool on the IBR. This paper provides a preliminary study of an in situ method for measuring planetary regolith mechanical parameters using a drilling tool on a test bed. A conical-screw drilling tool was designed, and its drilling load characteristics were experimentally analyzed. Based on the drilling tool-regolith interaction model, two identification methods for determining the planetary regolith bearing and shearing parameters are proposed. The bearing and shearing parameters of lunar regolith simulant were successfully determined according to the pressure-sinkage tests and shear tests conducted on the test bed. The effects of the operating parameters on the identification results were also analyzed. The results indicate a feasible scheme for future planetary subsurface exploration.     

基于位移和力值组合的静重式力标准机砝码加卸载控制方法研究

介绍了一种基于位移和力值组合的静重式力标准机砝码加卸载的控制方法，通过监测砝码的移动量和参考力传感器叠加系统的力值量，实时调整加卸载机构的加卸载速度，以实现对被检力传感器的平滑加卸载的目的。该方法有效解决了吊挂在加载过程中产生较大摆动，影响力标准机复现力值准确度的问题，同时也消除了力值过冲现象，避免了因逆程效应而导致的力传感器输出偏差。     

抗离群值的鲁棒正则化贯序超限学习机

针对离群值环境下的在线学习问题,提出一种鲁棒正则化贯序超限学习机(Robust regularized online sequential extreme learning machine,RR-OSELM)。RR-OSELM以增量学习新样本的方式实现在线学习,并在学习过程中基于样本的先验误差进行逆向加权计算以降低学习模型对于离群值的敏感性;同时RR-OSELM通过融合使用Tikhonov正则化技术进一步增强了其在实际应用中的稳定性。实验结果表明,RR-OSELM具有较同类算法更好的鲁棒性和实用性,对于离群值环境下的在线建模与预测问题是积极有效的。     

飞行器智能设计愿景与关键问题

未来飞行器正朝着多元化、无人化和智能化的方向发展，高超声速、超隐身和变体等新型飞行器不断涌现。而传统飞行器解耦分拆的设计方法越来越难以满足未来飞行器综合性能全面提升的要求，只有通过整体化设计才能充分发掘飞行器的潜能。通过分析传统飞行器设计中存在的问题，提出满足全生命周期要求的飞行器智能设计体系理念，利用知识库的构建将智能赋予飞行器平台系统设计、制造生产和运维这3个阶段，并通过数字孪生技术进行飞行器全生命周期的仿真、分析和预测，以对飞行器设计、运行等数据进行更新，使该体系形成闭环。就飞行器智能设计体系中需要的关键技术及涉及的科学问题等进行了讨论，并给出了未来发展方向以供参考。     

基于压缩量偏差约束的整体叶盘砂布轮数控抛光路径规划

数控抛光是实现整体叶盘叶片表面光整加工自动化、高效化的关键技术,而抛光路径规划对表面质量有着显著的影响。在抛光曲面时,砂布轮沿接触曲线上的径向压缩量偏差导致材料去除量一致性较差。针对该问题,提出一种基于压缩量偏差约束的路径规划方法。通过对砂布轮受曲面挤压变形几何分析,建立了自由曲面抛光接触线上砂布轮压缩变形量分布模型。在给定刀触点处,以接触曲线上最大压缩量偏差最小化为评价指标构建了刀轴矢量优化模型,并利用改进的粒子群优化（PSO）算法进行求解。基于最优刀轴矢量,完成自由曲面上等参数相邻刀触轨迹曲线的计算。最后,通过数据对比和试验,验证了所提方法的正确性和有效性。结果表明,抛光区域的轮廓度、粗糙度均得到明显的改善。     

CamShift在加油锥套识别跟踪中的应用

针对插头锥套式自主空中加油过程中加油锥套的识别跟踪问题,提出了一种基于Cam Shift的视觉识别跟踪算法。选取加油锥套跟踪视觉特征,将RGB空间图像转换到HSV色彩空间,并采用自适应阈值算法分割图像。运用最小二乘椭圆拟合算法解算锥套在图像中的中心点坐标;根据目标像素位置变换速度,对Mean Shift算法的目标搜索窗宽进行自适应修正;定义基于巴氏系数的阈值函数,处理锥套被遮挡的情况;将VC与Open CV相结合,设计了加油锥套视觉跟踪软件,对锥套位置进行实时解算和显示。试验结果表明,该算法可达到毫米级精度,满足自主空中加油视觉导航的技术要求。